Monster Level 5 Clutch
The Level 5 is a testament to Monster's commitment to improving their products. Do you have a car that makes (dare we say) 825hp/tq? Get in here! This clutch will have you thinking! It’ll have you second guessing your buddy who just spent a ton of cash on a twin disc when it wasn’t necessary. Monster learned that when you start building single disc clutches that exceed 800hp/tq you have a whole other set of problems to contend with. The two important ones are plate load and clutch pedal effort. Monster put their heads together with these two issues with a mission; make it hold, make the pedal soft, and don’t tell me we need a slave cylinder spacer. Well, after countless hours they got their answer in the form of our Extreme pressure plate! It has a test proven 3,000lbs clamp load and a pedal pressure that is 10-12% stiffer than stock! It’s amazing, and it’s only available from Monster Clutch Co. So Monster took this pressure plate and combined it with their proven 6 puck ceramic disc and a SFI certified billet steel flywheel and came up with a clutch that not only holds the power, but makes the car drivable and gives repeatable holding performance! You can do all the same stuff to this as you can the Level 3 and do it in style at a whopping 125hp/tq more! Beat on it, launch it, power shift it, it’s gonna beg you for more! Got a weak drive train? This will let you know! This clutch is rated at 825hp/tq. It’ll take as much of your 825hp/tq as you can throw at it. The material on this clutch, mixed with our Extreme pressure plate, will make for one serious street clutch. Don’t fear it, you can drive it daily and it won’t make your left calf muscle bigger than the right one. Warning: This clutch will find weak points in the drive train, if you have an inadequate drive train there will be failures! Our Basic Package includes the following: Extreme pressure plate, 12" cerametallic 6 puck disc, 28lbs SFI certified billet steel flywheel or a 18lbs SFI certified light weight flywheel (your choice), pilot bearing, release bearing (unless it's the C6 package), and alignment tool. Our Premium Package includes the following: Extreme pressure plate, 12" cerametallic 6 puck disc, 28lbs SFI certified billet steel flywheel or a 18lbs SFI certified light weight flywheel (your choice), pilot bearing, release bearing, slave cylinder, and alignment tool.