99-04 Mustang GT Single Turbo System - 350 to 850 HP

Our most popular kit, the 99-04 Mustang GT kit , has taken the aftermarket by storm. Want 430 reliable rear wheel horse power from you street car? Then simply install one of our kits on your 99-04 Mustang GT and reap the benefits of power and reliability. Drive your car daily? No problem, this kit, on a stock '99 GT, averaged 26mpg when we drove it from Albuquerque, New Mexico to St. Louis, MO. in 2005. The car also never ran hot, and we had the A/C blasting the whole way. This is the best performance option for your 99-04 Mustang GT. A complete list of parts and upgrades. 1 (1) Turbonetics 62mm Turbo 2 (1) Turbosmart Ultragate wastegate 3 (1) bar and plate intercooler 24x6x3 4 (1) 39lb injectors w/ adaptors (set of 8, optional) 5 (1) fuel pump (optional) 6 (1) mass air meter (optional) 7 (1) mass air meter adapter flange, hardware (optional) 8 (1) k-member, a-arms and coil over kit 9 (1) Mitsubishi bypass valve 10 (1) main turbo inlet pipe 11 (1) crossover pipe 12 (1) downpipe 13 (1) exhaust double barrel 14 (1) cat or straight pipe 15 (1) y-pipe 16 (1) small wastegate pipe 17 (1) intercooler pipe 1 18 (1) intercooler pipe 2 19 (1) intercooler pipe 3 20 (1) boost inlet pipe/polished 21 (1) radiator hose 1 5/8 polished 22 (1) turbo 4" inlet pipe/polished 23 (1) turbo support bracket 24 (1) intercooler support bracket 25 (1) coolant can support rod and nut 26 (2) ps line splices 3/8" 27 (1) ps line hose 10"each/28 ft 28 (4) ps line high pressure clamps 3/8" 29 (1) oil feed line 47" #4 30 (2) 1/8 pipe to #4 90 degree fitting 31 (2) 2 inch hose clamps for radiator hose 32 (4) 3/4 inch hose clamps/idle hoses 33 (1) breather hose 5/8" x 20 " 34 (4) 5/8 breather hose clamps 35 (4) 4 to 4.5 inch hose clamps 36 (4) bypass hose clamps 37 (2) metric stainless bolts for wastegate 38 (2) 5/16 stainless bolts for wastegate 1" long 39 (1) metric bolt for turbo support bracket/38mm long 40 (1)metric bolt for turbo support bracket/35mm long 41 (2) metric bolts from intercooler to radiator support 42 (4) washers for metric bolts 43 (1)1/4 x 3/4 bolt ps line cooler bracket 44 (2) 1/ 4x 3/4 bolt for elec box relocation 45 (3) 1/4 inch nylock nuts 46 (6) 1/4 inch washers 47 (1) Adel clamp for a/c line 5/16" hole 48 (1) 5/16 x1/2 bolt to secure Adel clamp to boost hose 49 (1) 5/16 inch washer 50 (2) Metric bolts for oil drain to turbo 51 (2) washers for oil drain 52 (4) 3/8 x 1 1/2 bolts, nuts, and washers for turbo to turbine inlet 53 (2) 3/8 x 1 3/4 bolts and washers for crossover connection 54 (3) 3 inch torque clamps for exhaust 55 (1) rubber dog bone 1.75" center to center 56 (1) hanger for exhaust 57 (4) 3/8 x 2.5 bolts, nuts, and washers for y-pipe to mufflers 58 (2) turbo bracket spacers aluminum 59 (3) 5/16 x 3/4 bolts, nuts, and washers for intercooler support bracket, exhaust hanger 60 (1) #10 straight hose fitting 61 (1) #10 90 degree hose fitting 62 (1) #10 line, steel braided, 1 foot 63 (1) 3/8 to #10 oil return fitting 64 (10) 2.5" stainless T-bolt clamps 65 (2) 3 inch stainless T-bolt clamps 66 (1) 3 inch v-band clamp for turbo outlet 67 (8) NGK Spark plugs 68 (1) 4"/3.5" long silicone hose piece 69 (1) 4"/2" long silicone hose pieces 70 (5) 2.5 inch silicone hose pieces 3" long 71 (1) 3 inch silicone hose piece 3" long 72 (2) 1 3/8" x 2.5 silicone hose pieces 73 (1) 3 ft 7/32 vacuum line for bypass 74 (1) brass tee 75 (1) Turbo oil outlet flange 76 (1) #10 Turbo oil outlet extension fitting 77 (1) Turbocharger heat shield 78 (1) 1 5/8 inch clamp for wastegate tube 79 (1) punch for oil pan 80 (1) K and N air filter 81 (1) heat wrap roll 82 (2) stainless fan heat shields 6x3 83 (2) stainless heat shields for steering boots 4x5 84 (8) metal zip ties 85 (10) zip ties for ps hose retention Maximum Motorsports K-Member Upgrade Includes: MM Hellion K-member MM Front control arms MM Front coil over conversion kit w/hypercoil springs MM Aluminum steering rack bushings MM Caster camber plates MM Ajustable tie rod ends This kit includes the caster camber plates, a-arms, and coil over with the K-Member. If Package is deleted, none of the merchandise in K-member kit will be received. (Customer understands that 99-04 systems were designed around the UPR tubular K-member Kit and therefore, using any other manufacturer may complicate installation of the Hellion Turbo System and change the intended design.)